YAGO Household Solar Irrigation Timer LCD Automatic Irrigation System Outdoor Smart Garden Watering Tool Adjustable Program

YAGO Household Solar Irrigation Timer Digital LCD Automatic Irrigation System Outdoor Smart Garden Watering Tool Adjustable Program

Product Introduction

1.This product is a smart water valve controller product that uses photovoltaic charging. For outdoor use, it can be charged by solar panel. For indoor use, a Type-C charging port is reserved at the bottom of the product.

2.This product is suitable for villa courtyard, balcony garden, roof garden, family green wall, three-dimensional greening micro-sprinkler, construction site project dust removal, vegetable garden drip irrigation, sprinkler irrigation.

3.The product is waterproof grade 5, can withstand heavy rain, but can not be immersed in water.

4.The shell is made of UV-resistant material and can be exposed to the sun.

Warm tips

1. Before assembly, test the mainframe without any faults before starting to lay water pipes and install accessories.

2. The main unit should be protected from rain and sun, but not from freezing. Do not use it in low temperature below 0 ℃. This product uses water pressure of 0.3-8KG, flow rate of 8L-31L/min, and applicable water temperature of 1-60 ℃.

3. Please keep the water source clean, there are some impurities in tap water. It is recommended to clean the filter regularly to avoid clogging.

Instructions for use

1. Long press the ‘ESC’ button for five seconds to switch the main unit on or off. There is a memory function after switching off the main unit, which can save the last timer setting.

2. press and hold the ‘SET’ and ‘OK’ button for 3 seconds to start the child lock function to prevent children from operating the mainframe at will.

3. Designed with rain sensing control function, automatically stop watering on rainy days.

4. two independent watering outlets can be controlled, and each outlet can be set with two sets of independent timings, total four sets of timings.

5. The maximum watering time can be set to 299 minutes, and the interval time is 1-30 days.

Note: This product cannot work in low temperature conditions.

About maintenance

1. Within three months, any damage caused by product material or design defects can be repaired free of charge.

2. The following product defects not caused by our company are not included in the free repair scope

Non-repair scope:

A. Water ingress or moisture caused by improper installation

B. Voltage mismatch causing the main unit to burn out

C. Repair or modification not authorised by the Company

D. Other force majeure factors